Page 1 of 1
boom vang
Posted: Mon Mar 02, 2015 7:39 pm
by atles
Hi all can some one give me a good set up for a boom Vang on an investigator thanks
easy to take off and put on a picture would be nice too thanks .
Re: boom vang
Posted: Mon Mar 02, 2015 10:23 pm
by Ozzie
Atles. I dont have a pic of my vang but in short it clips to the bracket that should be there on the bottom of the boom, then I have a block set up (4 to 1 I think) that then terminates with a flat D shackle on the round tube that is cast into the mast step. Someone will have a pic Im sure.
Re: boom vang
Posted: Tue Mar 03, 2015 5:17 pm
by Dr. Peter
Here's my vang - I use a horseshoe type to cope with the roller-reefing.
Re: boom vang
Posted: Wed Mar 04, 2015 1:30 pm
by Yara50
For the bottom fitting see:
http://www.investigator563.com/forum/vi ... ?f=2&t=310
If you are using slab reefing there is a standard keyhole fitting to mount on the bottom of the boom.
Re: boom vang
Posted: Wed Mar 04, 2015 9:39 pm
by atles
thanks guys
