Painting your boat.
Posted: Wed Apr 23, 2025 10:51 am
https://forums.ybw.com/threads/is-dulux ... uy.618127/
I know this post will generate strong opinions but it’s always interesting to see what has and has not worked for others. It’s the reason I read forums of all types. British site obviously but Dulux Weathershield Gloss is universally available apparently. For the record my Swiftcraft Viscount cruiser had a bespoke ply hardtop covered in glass mat and timber grab rails. I had that on a mooring in the elements 24/7 for 15 years and it is still on the boat 20 years later as I found a pic of it on the net (posted on here if you do a search) Oil undercoat and WG White.
We owned a small house in the rural area a round Tamworth for 10 years decades ago. Visiting the town last year the Weahershield Gloss paint that was put on then is still going 30 years later. Faded and needs a repaint but still hanging in there.
As most will know, it’s preparation that is the key no matter what you use. The house under reference above was taken back to bare timber, primed and undercoated with dulux oil based and three WG top coats. Payed off. Bloke that did the sand went through over 100 large medium grit disks. Anyway lots of interesting discussions on this thread. Hope it’s as informative to you as it was to me.
I know this post will generate strong opinions but it’s always interesting to see what has and has not worked for others. It’s the reason I read forums of all types. British site obviously but Dulux Weathershield Gloss is universally available apparently. For the record my Swiftcraft Viscount cruiser had a bespoke ply hardtop covered in glass mat and timber grab rails. I had that on a mooring in the elements 24/7 for 15 years and it is still on the boat 20 years later as I found a pic of it on the net (posted on here if you do a search) Oil undercoat and WG White.
We owned a small house in the rural area a round Tamworth for 10 years decades ago. Visiting the town last year the Weahershield Gloss paint that was put on then is still going 30 years later. Faded and needs a repaint but still hanging in there.
As most will know, it’s preparation that is the key no matter what you use. The house under reference above was taken back to bare timber, primed and undercoated with dulux oil based and three WG top coats. Payed off. Bloke that did the sand went through over 100 large medium grit disks. Anyway lots of interesting discussions on this thread. Hope it’s as informative to you as it was to me.