Hi all, how many times have you had to cut a panel to fit into an irregular shape? For example to fit a decorative sheet of ply to a bulkhead. Using a sheet of cardboard smaller than the shape that is required and a Ticking Stick is the way to do it. Here is how, hope you enjoy it
https://youtu.be/Cd2LY857oTY
How to use a Ticking Stick
- Peter T
- Posts: 650
- Joined: Sat Aug 15, 2020 10:34 pm
- Investigator Boat Name: Sail- La- Vie
- Location: Ulverstone Tasmania
How to use a Ticking Stick
Regards Peter T
" Sail-La-Vie," # 114
"Believe me, my young friend, there is nothing - absolutely nothing - half so much worth doing as simply messing about in boats."
" Sail-La-Vie," # 114
"Believe me, my young friend, there is nothing - absolutely nothing - half so much worth doing as simply messing about in boats."
- Raya
- Posts: 315
- Joined: Sat May 05, 2012 4:25 pm
- Investigator Boat Name: Tme Out
- Location: Gold Coast
Re: How to use a Ticking Stick
A useful tool indeed.
For curved surfaces, I bought this tool from ebay. You push it up against the surface and the contour stays on the protruding pins. It is useful to define awkward shapes that are in hard to get at places. The tools come in different sizes.
For curved surfaces, I bought this tool from ebay. You push it up against the surface and the contour stays on the protruding pins. It is useful to define awkward shapes that are in hard to get at places. The tools come in different sizes.
Ray
Investigator #39
Investigator #39
Re: How to use a Ticking Stick
If you every find a copy of "This Old Boat" by Don Casey, it has this plus a million other useful bits of information. Highly recommended.
Ian, Rhythm #121