Investigator size

General Sailing Talk
Post Reply
betchern0t
Posts: 4
Joined: Wed Feb 19, 2025 12:20 pm

Investigator size

Post by betchern0t »

Hi,
what is the typical length and width of an investigator 563 packed and on the trailer? I want to see if I can shoe horn it into my parking spot...

Cheers Paul
User avatar
Ozzie
Posts: 1728
Joined: Wed May 27, 2009 1:07 pm
Investigator Boat Name: Spritzig II
Location: Lake Macquarie
Contact:

Re: Investigator size

Post by Ozzie »

https://johncrawfordmarine.com.au/advic ... r-563/file

Hi Paul, I’m moored so I was thinking a trailer based owner would chip in but as not, the above link has the overall dimensions of the 563. I will get a measurement of my trailer’s distance from post to the coupling to add on later today and post that. It’s worth noting that trailers come in various configurations so may be some differences, as in some are dual axle and may have a wider track. If you’re very tight for length it’s not unusual these days to see boat trailers or caravans with folding drawbars.

The regulations forcing boat trailers off the street in NSW will ultimately have more people trying to squeeze trailers of all types into limited off street parking. You can even get caravan wheel replacements which are a rim with no tyres, just rubber edge, on the rim to shoehorn vans and pop tops under garages and carports. What a total pain having to replace your wheels every time you want to park your van .

Blow up trailer sailer anyone? :lol:
Ozzie
Investigator #143 "SPRITZIG II"

The Mariner - “It’s too strange here. It doesn’t move right." ...
Enola - “Helen said that it’s only land sickness."
Waterworld (1995)
User avatar
Ozzie
Posts: 1728
Joined: Wed May 27, 2009 1:07 pm
Investigator Boat Name: Spritzig II
Location: Lake Macquarie
Contact:

Re: Investigator size

Post by Ozzie »

My winch post to tow ball is 1.4. Add 5.63 to give a overall length of 7 m plus whatever hardware you have on the stern by way of outboard brackets. My trailer is 2.0 m wide but as the boat is 2.1. That’s your width. Overall height on trailer will need a trailer user to chime in.


This link has Ray talking about a suitable shed size, about half way down the page. Remember your mast will overhang a bit but it’s not an issue to remove it and store it down the side of the house I suppose.

viewtopic.php?p=7404&hilit=Height#p7404
Ozzie
Investigator #143 "SPRITZIG II"

The Mariner - “It’s too strange here. It doesn’t move right." ...
Enola - “Helen said that it’s only land sickness."
Waterworld (1995)
User avatar
Andrew
Posts: 634
Joined: Sun Aug 18, 2013 11:33 am
Investigator Boat Name: Teria
Location: Townsville, Qld
Contact:

Re: Investigator size

Post by Andrew »

Hi Paul, my I563's trailering height is around 2.2m (others 2.4m?)

A caveat, my boat Teria probably sits lower than many other I563's. Because rebuilt my trailer frame with a low-slung centerline for the keel . My 2.2m is the height of the lowered mast resting on my bow rails (pulpit) to the ground ( the aft mast crutch a similar height).

Investigators have varied crossbeam/roller designs from deep V's (lower) to straight across (highest)
Last edited by Andrew on Mon Apr 07, 2025 12:37 pm, edited 2 times in total.
Andrew

Investigator #9 Teria
User avatar
Andrew
Posts: 634
Joined: Sun Aug 18, 2013 11:33 am
Investigator Boat Name: Teria
Location: Townsville, Qld
Contact:

Re: Investigator size

Post by Andrew »

Length of my boat on trailer is 7.8m (has extended drawbar and outboard bracket) (6.3m winch-post to OB bracket + 1.5m to towhitch at front)

Cheers
Andrew

Investigator #9 Teria
Post Reply