Hi all
I had a bearing go on my trailer on Tuesday after pulling from water. Thought the photos of repair might be useful for others. Note i only ever move boat 300m each time is use, but i obviously inherited this problem when i bought the boat in 8 months ago.
I had a local mechanic come and do a house call, he and is apprentice did al the work, and very well too.I replaced both bearings on trailer.
first pics the ugly!
Trailer bearing change
Re: Trailer bearing change
the repair
Re: Trailer bearing change
I have added a new grease cap which forms and additional level of seal and allows me to pump grease into the bearing i was advised about every 6 months, its spring loaded to when grease breaks down you add more until spring bounces back - note nice outer palstic seal also, these parts are all stainless.
Re: Trailer bearing change
Mark
Take a look at an early post in this forum regarding trailer wheel bearings, and you will see that the so called "marine" seal is hopeless.
Take a look at an early post in this forum regarding trailer wheel bearings, and you will see that the so called "marine" seal is hopeless.
Ian B
Ex Investigator 563 #50 Yara
Ex Investigator 563 #50 Yara
Re: Trailer bearing change
Hi Mark,
Thanks for posting. Having the pictures is always a nice reference.
Larry
Thanks for posting. Having the pictures is always a nice reference.
Larry