INVESTIGATOR 563

Hi Ian, yes good thought, however I reckon I will have the autohelm hooked up all the time, so I figure fitting the plug on the inside of the combing directly under the ST1000. That way it would only be uncomfortable when the thing was not fitted. Will probably make the final decission once I have t...

Hi all, I also purchased an ST1000 for mine. It will also be mounted on the top pf the combing., I worked out that they did not make a shaft extension long enough, so purchased their longest one which I think is 6 inches. I will also cut this into two and turn up a piece in the lathe to extend it to...

Hi Paddy, when I launch or retrieve, I always use the tilt as well as my Draw bar extension. I only have to enter the water to just above the axle for launch using these aids, but I always submerge a little more on retrieve as this then reduces the need for winching, even though that is not too much...

Hi all, found this on UTUBE. Best I have seen. thought you might enjoy, its a great watch.

https://www.youtube.com/watch?v=lwX66PK ... Is2TtojBXF

Cheers

Hi all, thought I would post some pictures of the bilge pump set up in Sail La Vie. Cheers

Merry Christmas one and all. Hope to get on the water if this rotten wind will die down a bit, even if it’s only to give the new fishing rods their first run.
Cheers

https://www.facebook.com/marketplace/it ... tid=dXMIcH
Includes new Tohatsu Sail Pro
$8000 the lot or $6000 without the motor or $2000 for the motor only

Finally ! I thought it would take 6 months and the big launch day came today after only three and a half years of hard work. WOO HOO. Now, to start sorting out the rigging. As you can see in the second photo, I needed to use my tow bar extension as well as the tilt function of the trailer, even thou...

Beautiful job Andrew. Well done

Good Job Andrew, keep the progress photos coming mate. Cheers